SBI Term Loan: RLLR: 8.15 | 7.25% - 8.55%
Canara Bank: RLLR: 8 | 7.15% - 9.85%
ICICI Bank: RLLR: -- | 8.5% - 9.65%
Punjab & Sind Bank: RLLR: 7.3 | 7.35% - 10.75%
Bank of Baroda: RLLR: 7.9 | 7.2% - 8.95%
Federal Bank: RLLR: -- | 7.35% - 9.6%
IndusInd Bank: RLLR: -- | 7.6% - 10%
Bank of Maharashtra: RLLR: 8.05 | 7% - 9.15%
Yes Bank: RLLR: -- | 7.4% - 10.54%
Karur Vysya Bank: RLLR: 8.8 | 8.5% - 10.65%
HDFC Bank: RLLR: -- | 7.75% - 13.2%
Axis Bank: RLLR: -- | 8% - 9.1%
IDBI Bank: RLLR: -- | 7.4% - 10%

Hanging OHE wire and relay room fire disrupt Mumbai local train services, leaving commuters stranded

#Infrastructure News#Infrastructure#India#Maharashtra#Mumbai City
Synopsis

Mumbai’s Central Railway suburban services faced major disruption during the morning rush hour on 26 October 2026 after a wire was found hanging from overhead equipment between Mulund and Thane and a fire in the signalling relay room at Kanjurmarg caused a signalling failure. Commuters reported delays, overcrowded trains and prolonged halts, with some passengers walking along railway tracks. While the overhead wire issue was resolved within about an hour, restoration of the affected signalling systems continued through the day.

Mumbai’s suburban train services on the Central Railway network were disrupted during the morning rush hour on Monday, 26 October, following two separate incidents involving a hanging overhead equipment (OHE) wire between Mulund and Thane and a fire in the signalling relay room at Kanjurmarg. The incidents affected train movements across parts of the Central Railway mainline, causing delays, crowding at stations and difficulties for commuters travelling to work and educational institutions. 
According to Central Railway officials, a wire was detected hanging from the OHE on the down slow line between Mulund and Thane at around 9.23 am, approximately 31.14 km from Chhatrapati Shivaji Maharaj Terminus (CSMT). An OHE block was granted at 10 am to allow railway staff to attend to the obstruction safely. Services on the affected section resumed after around an hour of work, officials said. 
The wire-related disruption coincided with a signalling failure at Kanjurmarg, where a fire in the signalling and telecommunications relay room affected operations. The incident occurred at around 9.30 am, causing signals to go blank and disrupting train movements at Kanjurmarg and along the Vikhroli–Bhandup section. 
The resulting delays affected the Central Railway mainline connecting CSMT in south Mumbai with Kalyan in Thane district, from where the route branches towards Kasara and Khopoli. Commuters reported that trains were running behind schedule, with some services held on tracks for extended periods. Crowds increased at stations and inside coaches, while some passengers were seen walking along railway tracks between Mulund and Nahur. 
To manage train movements while the signalling system was unavailable, railway authorities introduced alternative operating arrangements. These included absolute block working on sections between Vikhroli and Bhandup, along with special authorisation for train movements. Such procedures allowed services to operate under controlled conditions while technical teams worked to restore the affected systems. 
The restoration process continued through Monday. Central Railway officials said the down-fast line at Kanjurmarg was declared fit for operations at 4.10 pm, followed by the up-fast line at 4.46 pm. The down-slow line was declared fit at 5.30 pm, while the up-slow line was restored at 6.18 pm. The railway also ordered an investigation into the disruption. 
The incidents highlighted the impact that faults in overhead equipment and signalling infrastructure can have on Mumbai’s heavily used suburban railway network, particularly during peak commuting hours. Although the hanging-wire issue was resolved relatively quickly, the relay room fire caused a more prolonged interruption as railway personnel worked to restore signalling and resume normal train operations. 
Source- PTI

Discussion

Have something to say? Post your comment