The Gulf conflict has disrupted global supply chains, pushed...
REITs have changed the way commercial real estate is owned a...
What really powers the cloud? Behind every Google search, A...
What really powers the cloud? Behind every Google search, A...
Luxury real estate is one of the most talked-about segments ...
The Haryana government has proposed amendments to the Haryana Building Code, 2017, that could increase the maximum permissible Floor Area Ratio (FAR) for residential plots to 264% for properties measuring up to 250 sq m and 240% for larger plots of up to 1,000 sq m. The proposal retains the maximum building height of 16.5 metres, including stilt-plus-four-floor construction. The amendments are intended to provide greater construction flexibility to homeowners and developers, with the Town and Country Planning Department inviting public feedback until 1 December 2026.
The Haryana government has proposed revisions to the Haryana Building Code, 2017, that would increase the maximum permissible Floor Area Ratio (FAR) for residential plots, allowing property owners to undertake additional construction within the existing height restrictions. The proposed framework provides for a maximum FAR of 264% on plots measuring up to 250 sq m and 240% on larger plots extending up to 1,000 sq m.
The Directorate of Town and Country Planning (DTCP) issued a public notice on 2 November 2026, inviting objections and suggestions from residents and other stakeholders regarding the proposed amendments. The deadline for submitting feedback is 1 December 2026.
Under the proposed changes, residential plots have been divided into five categories, with different provisions for base FAR, maximum permissible FAR and ground coverage. For plots measuring up to 100 sq m, the base FAR will be 165%, while the maximum permissible FAR, including additional purchasable construction rights, will be 264%. Ground coverage will remain at 75%.
For plots measuring above 100 sq m and up to 250 sq m, the base FAR is proposed at 145%, with the maximum permissible FAR also reaching 264% and ground coverage remaining at 75%.
For larger properties measuring above 250 sq m and up to 350 sq m, the proposed base FAR is 130%, while the maximum permissible FAR will be 240%. Ground coverage for this category will be 66%. Plots measuring above 350 sq m and up to 500 sq m will have a base FAR of 120%, while those measuring above 500 sq m and up to 1,000 sq m will have a base FAR of 100%. Both categories will have a maximum permissible FAR of 240% and ground coverage of 66%.
The additional construction potential beyond the base FAR will be available through purchasable FAR, subject to applicable charges and statutory approvals. For instance, a residential plot measuring 300 square yards, or approximately 251 sq m, will fall under the 250-350 sq m category. Its base FAR of 130% would allow approximately 3,510 sq ft of construction, while the maximum permissible FAR of 240% could increase the potential built-up area to 6,480 sq ft.
The proposed amendments retain the maximum building height at 16.5 metres across all five plot categories. The framework provides for ground-plus-three-floor construction, including stilt parking and four floors (S+4), along with a single-level basement across the categories.
The changes could provide existing homeowners with greater flexibility to expand or reconstruct their properties and offer developers additional scope for independent-floor construction. However, higher permissible FAR could also increase residential density in established colonies, potentially adding pressure on roads, parking facilities, water supply and sewerage infrastructure.
The proposed amendments seek to replace the existing provisions under Sub-code 6.3(3) of the Haryana Building Code, 2017. The final provisions will depend on the consideration of objections and suggestions received by the department.
17th Nov, 2026
15th Nov, 2026